Filters

List of draw hook Tenders

List of latest draw hook Tenders in Indian Tenders. Click on any draw hook Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for draw hook Tenders.

All-Tenders (16)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35394173 | 26 Sep, 2025

Tender Value : 0

Bareilly - Uttar Pradesh

Tender for gem bids for enamel, synthetic, exterior a undercoating b finishingv4 confirming to is 2932 q3, block board of size 8feetx4feetx18mm, sofa cushion 40 d size 560 x 530 x100mm thick, hdhmr board 8 feet x 4 feet x 18mm bsl, seat and back for chair cb tubular, plywood ost 8 feet x 4feet x 19mm bwr gde, foam sheet 6 feet x 3 feet x100mm 40 density, sunmica sheet 8feetx4feetx1mm thick, pvc seat for chair school, foam sheet 6 feet x 3 feet x75mm 40 density, plywood 8 feet x 4 feet x 6 mm ost, plywood 8 feet x 4 feet x 4 mm ost, looking mirror 450mmx 1250mm x 5mm, d type cp handle of size 100mm, prelaminated particle board bsl 8 feet x 4 feet x 9mm, prelaminated particle board bsl 8 feet x 4 feet x 18mm, red oxide primer first quality, abressive cloth 100 no size25mmx50mtr, fevicol one kg pack, varnish oil in 4 ltrpack, cloth malmel 1 point 2 mtr width, peg set of sixbrass 100 mm long bea 30, stainless steel d type handles75mm, paint se red po 1st quality 4 ltr pack, woodenfrench polish in 4 ltr pack, paint se silver first quality 4 ltrpack, primer se white 4 ltr pack, two hole brass lock foralmirah, hasp and staple aluminium 75mm, abressivecloth s oblique 60 no size 25mm x 50mtr, lakh dana, lockbrass for drawer with keys for table steel, but hinges steel100mm, teak wood half round beading 18mm x 4mm, door magnet catcher size 4 cm x 5 cm x 4 cm, knobanodised 32mm with screw, stainless steel d type handles100mm, turpentine oil 5 ltr pack, peg hook brass 125 mmlong, door magnet catcher, cloth green baize 1 point 2 mtrwide, but hinges steel 50mm, sr solution in 200 grm pack, but hinges steel 75mm, aluminium d type handles100mm, knob anodised 25mm with screw, brush paint50mm, brush paint 75mm, hasp and stapple stainlesssteel 75mm, screw wood steel 65 x 12mm, screw woodsteel 25 mm, nails wire 2 inch, screw wood steel 35x8mm, pilli mitti 400 gm pack, creosote oil for furniture 1 ltrpack, putty for wood works 400gm pack, brush paint25mm, prelam mdf board ext gde size 8 feet x 4 feet x 18mm bsl, varnish clear wood keeper, screw wood steel50mm, looking mirror for table dressing ladies, lookingmirror for table dressing gents, nails wire 40 mm, prelammdf board 8 feet x 4feet x 12mm bsl finish, plywood 6 feetx 3 feet x12mm bwr type //bid details2 / 59

State Government

TRN :35396507 | 25 Sep, 2025

Tender Value : 34.27 Lacs

Raigad - Maharashtra

Tender for borewell drilling 150 mm dia by dth machine including transporting of machine at worksite, providing & placing 180 mm dia 6 kg p.v c.casing pipe (l5:4985-1988) & fixing borecap after complation of borewell, yield testing of borewell by 90 degree v notch method for minimum 2 hrs .continously, providing cap for 180 mm dia p.v.c.casing pipe, casing pipe lowering & grouting, solar system, supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintained for 5 years. 3 bhp solar pump construction of bandhara, clearing cutting thorny shurbes, bushes , mooleyhills etc. complete, excavation in hard murum/hard man kankar/pebbles, exceeding 1.5m in width including depositing the material as directed with all lead upto 15m and lift into 1.5m including boulders of size less than 0.10cum including dressing etc complete. excavation in soft rock exceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10cum, dressing etc complete. excavation in hard rock exceeding 1.5m in width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of size exceeding 0.10cum including dressing etc complete providing and laying rubble soling below foundation in layers including fillinf with rubble chips murum etc. complete (excluding royalty material) providing and laying in situ cement concrete of grade m-150 of trap / granite / gneiss /quartzite graded metal for pcc with or without surface reinforcement rcc/concreting requiring heavy or spetial type of shuttering for works of gallery ,sluice,spillway crest,spillway down stream face,energy dissipating structure,inteke structure,training walls,piers abutments etc.with concrete mixture considering lead of 50 m with shuttering and scaffolding ,placing ,compacting,curing etc.complete with an initial lead of 50 m and lift of 1.50 m. providing & laying in position tor steel reinforcement including cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m providing casing embankment using selected previous material available directly from excavation in layers including cost of all other operations such as collection of material spreading material in layer of specified thickness sorting out breaking clods levelling sectioning edges sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1km for watering and 6m lift. providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. providing and fixing 90 cm x 60 cm marble plate engraving 10 cm.height letter ,figures including painting the lefters/ figures withapproved colour and shade complete " "rcc well providing and laying in situ cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete." providing & costing in constructing in situ. c.c of trap granite/ quartzite / gneiss/ metal of approved quality of r.c.c. work as per detailed drawing & design or as directed by engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with c.m. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( by weight batching & mix design for m-250 & m-300 only use of l&t, acc ambuja, birla gold, manikgad, rajashree etc. cement is permitted excluding m.s or tor reinforcement in r.c.c. m-250grade. 1) r.c.c. m-250for beam " 2) r.c.c. m-250 for vertical wall providing & fixing in position steel bar reinforcement of various diameters for r.c.c. pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). tor steel" providing & laying weep holes of 80 mm ac/pvc pipe as per drawing for abutment returns, return walls etc. complete. dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by engineer-in-charge (including cost of machinery labour fuel )etc complete. providing rubble stone paving 15cm thick in 1:3 cement mor tar over bedding of 15cm thick cement concrete of 1:4:8 propor t ion wi th t rap / grani te / quar tzi te / gneiss metal including st r iking joints and water ing etc. complete." providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete." reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. providing and fixing in position c.i. dapuri steps or 22 mm dia. m.s. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer- in-charge." providing and fixing 90 cm x 60 cm marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. lift 0.00 m to 1.50 m" "switch room excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a- 1/259)" excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-2/259) providing and laying in situ cement concrete in m – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. "providing second class burnt brick masonry with convent ional/ i.s.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. complete " providing and casiting in situ cc of trap /granite/quartzite/gneiss metal of approved quality for r cc work as per detailed drawing and designs or as diredcted by engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withcm 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. slabs b) in rcc m-200" providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. item no 8 :- filling the plinth & floors murum bedding in trenches with approved murum from excavatyed materials form foundation 15 cm. to 20 cm. layers including watering and compaction complete. providing and laying cement concrete flooring 40 mm thick wi th m15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. with natural sand providing and fixing frame wi th / wi thout ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete item no. 11 :- providing and fixing count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete item no. 12 :- providing and fixing count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete item no.13 :- providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. item no.14 :- providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. item no. 15 :- providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete item no. 16 :- providing and fixing in position steel bar reinforcement of various diamenters for rcc piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) "pumping machinery item no. 1 :- providing, erecting and giving test of submersible pump set conforming to is 8034 and motor conforming to is 9283, with water proof winding. pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415 v ± 10%, 3 ph, 50 hz a.c. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge out let as per manufacturer's design. antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages" "item no. 2 :- supplying and erecting, flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed. 3 core 10sqmm" "item no. 3 :- supplying and erecting fully automatic star delta starter to operate squirrel cage induction motor working on 380- 440 volt, 3 phase, 50 hz with no volt coil, over load element, and on off push buttons, with necessary material and connected to supply, etc complete. starter with original sheet steel encloser. > 7.5 hp & up to 12.5 hp" item no.4 :- providing , installing & commissioning main control pannel board including v.meter & a. meter of suitable range single phase prevention 8 nos. of phase indicater lamps with colour glass of 230 v rotary switch over load capacitor suitable for 7.50hp and 12.50bhp pump etc.complete. (market rate) "item no.5 :- providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. pressure gauge shall be installed as directed, with tapping on rising main. pressure gauge (100 mm dia)" item no.6 :- providing tools for pumping. item no. 7 :- main wiring work from m. s. e. b. cut out to the panel board 4 core x 459 mm 1100 grade with i. s. i. mark standard / aluminum armored cable (94.1 p.36) item no. 8 :- providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep "solar pump item no.1 :-supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintaince for 5 years " "rising main item no. 1:- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm item no.3 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no. 4 :- providing, erecting, connecting double flanged short body pattern tye manually operated butterfly valve having body, disc and end cover in graded cast iron to is 210 gr. cf 200 generally conforming in bs 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding c.c. foundation/ structural steel support confirming to is 3095-1991. sluice valves 80 mm dia for washout" "item no. 5 :- providing and supplying air valves as per is-10845 and mjp’s standard specifications of approved mark and quality of following diameters including all taxes (central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete. air valves 15 mm dia" "item no.6 :- excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (earth soil)" "item no. 7 :- excavation for foundation/pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (hard murrum)" "item no.8 :- excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. soft rock" "item no.9 :- excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. lift 0 to 1.5 m hard rock" item no. 10 :- filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. "item no. 11 :- lowering, laying and jointing h. d. p. e./ m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm "item no. 12 :- lowering laying and jointing in position following c.i.d/f reflux valves butterfly valves and sluice valves including cost of all labour joining material, including not bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of sluice valves) sluice valves 80 mm dia for washout" "item no. 13 :- lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. air valves 15 mm dia" "item no. 14 :- providing and fixing in position air valve shaft including providing and fixing gi medium class or 6 mm thick m.s. pipe shaft 2.70 m long over branch flange of air valve tee, providing pcc block of m-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in pcc m-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on murum & harder strata" item no 15 :- providing and laying in situ following grades of c.c. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. "item no. 15 :- providing and constructing b.b. masonry valve chamber with 15 cm thick 1:3:6 proportion pcc bedding, including excavation, b.b. masonry in c.m. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing c.i. manhole frame and cover in rcc 1:2:4 coping or cm thick slab etc. complete as directed by engineer-in-charge. size 0.90 x 0.60 x 1.20" item no. 16 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 17 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia hdpe pipe 8 kg/sqcm" "distribution system item no .1 :- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 2 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no.3 :- providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete sluice valves 50 mm dia" "item no 4 :- excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-1/259) earth soils" "item no. 5 :- excavation for foundation / pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bda-3/259) hmb" "item no. 6 :- excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking as directed by engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-4/259) soft rock" "item no. 7 :- excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (bd-a-6/259) hard rock" item no. 8 :- filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd-a-10/263) "item no. 9 :- lowering, laying and jointing h. d. p. e./m.d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 63 mm dia hdpe pipe 6 kg/sqcm" "item no. 10 :- lowering, laying and jointing in position following c.i.d/f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valves.) sluice valves 50 mm dia" "item no. 11 :- providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m-300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) a) 1:2:4 (m-150) grade " "item no. 12 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg) " item no. 13 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 14 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 15 :- providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x35 x3 mm frame with properly cross braced m.s.angles of size 35 mm x 35 mm x 3 mm duly painted including two m.s.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.spec. number as directed by engineer in charge morth 801 item no. 16 :- providing and making upvc/mdpe pipe consumer service connection on distribution main by drilling hole with suitable means , including all labour , upvc/mdpe pipe of required length with or without road crossing as described below, including cost of specials like saddle/clamp saddle of suitable material, and diameter suitable for distribution main, 15mm /20mm/ 25mm respective dia heavy duty brass/polyprophylyne(twin jacketed ) ferrule , male and female thread adapter elbow, bends,couplers ,tees, clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, gi casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by engineer in "trial run item no. 1 commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by mjp / local body and handing over the scheme to local body after completion of the above period as directed by engineer-in-charge.note: required chemicals to be supplied by department free of cost and electricity bill will also be paid by the department.for singlvillage" piped water supply scheme at - adnale tal- tala

Central Government/Public Sector

TRN :35399250 | 06 Oct, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for gem bids for 145, e2 ieb czech pms csn 029281 2 18x2 sealing sealingring 18x2 e2 ieb czech pms 56471 19 inlet valve fueldelivery pump e2 1400 21 65 25 e1 side cover e2140045 4811 e1 handle lever e2 csn 022301 1 rivet3x10 e2 csn 0221401 pin 4x25 e2 442 17942 0094two rope winch e2 140041 2132 f1 strip e2 iebczech pms 61 006 5238 connecting rod big end belt e2 ieb czech pms 1400 12 178 e1 flange or pontoonattachment e2 140046 2812 e1 end piece e2 1400462051 f1 washer e2 140045 6512 d1 pin e2 1400451044 d1 holder e2 csn 029312 2 sealing gasket6x10 e2 140041 1081 f1 tie rod ii e2 csn 021115 25screw m16x30 e2 140046 2661 e1 pin e2 140041 1051f1 lever i e2 1400 12 85 e1 pin e2 140043 398 f1 stop e2 5315 049402 pin straight headed dia 18mm o h l66mm e2 022702 1f1 retaining bar e2 ieb czech pmscsn 257210 pressure indicator b60 010mpa 25 e2022111 169 f2 fuel line tab 28 e2 022129 162 f1 pin e2 csn 02110 14 screw m12x16 e2 ieb czech pms68004 39 thrust rod injector e2 021702 15 washerb31 e2 type vp 8 bypass cock e2 csn 022927retaining ring 54 e2 140045 10207 e3 clamp e2140045 6514 e1 shim e2 140045 10221 d3 piping e2140046 365 e3 angle iron e2 csn 022562 key 8e7x7x25 e2 type 51314 bearing e2 140046 2831 e1 pin e2 1400 12 37 1 e1 lever e2 csn 027451 3 grease cup16 m10x1 e2 5360 040707 spring helicalcompression e2 140041 2131 f1 yoke e2 ieb czechpms csn 021103 24 m8x10 screw m8x10 e2 5365181026 spacer ring e2 140046 1311 e1 securinghook e2 5310 021804 washer plate 16x12x15 e2 iebczech pms pnd 68 063 78 55 65 150 cooling hose 55 65150 air system e2 5365 1810140045 1312 e1 spacer bid number gem2025b6677179 dated 15-09-2025 bid document1 103 1 1 ring, e2 csn 021131 24 screw m6x12, e2 140046 2713e1 draw bar, e2 140045 3051 e1 hook, e2 1400454752 e3 pipe, e2 ieb czech pms csn 023110 1600 v belta 1600 fire and cleaning system, e2 140046 2712 e1fork, e2 1400 21 65 32 e1 connecting link, e2 140045653 e1 spring, e2 ieb czech pms 8474 970 carbonbrush holder alternator, e2 csn 137890 couplingnd8, e2 1400 11 134 e1 bottom worm sleeve, e2 csn02115 24 screw m10x45, e2 1400 21 65 34 e1connecting link, e2 ieb czech pms csn 022930 20retaining ring 20 botoom connecting gr, e2 1400 2349 e1 ring, e2 ieb czech pms 1400 11 312 e1 l lefthand eye for platform recess, e2 140045 10261 d3piping, e2 1400 12 165 e1 sleeve, e2 140043 306 e1handle, e2 140045 1036 d1 lid lid, e2 140046 2761 e1pin, e2 1400453071 e3 holder, e2 ieb czech pms 140024 58 e1 wedge, e2 ieb czech pms 1400 11 301 e1wooden pole attachment element, e2 601386 5e7spring, e2 140040 2 41 e1 roller, e2 140046 4122 e2ring, e2 1400 21 65 23 e1 brake arm, e2 csn 022150 1pin 3x20, e2 type 9430 40 plug switch, e2 14004511011 e3 coupling, e2 ieb czech pms fj 2r 1218coarse fuel cleaner, e2 csn 029310 3 sealing ring20x24, e2 csn 021412 24 nut m20, e2 1400 40 2 13 d1worm, e2 type 08 9416 02 illumination of tow, e2140045 576 f1 retaining bar, e2 5360 040709 springhelical extension, e2 type 51205 bearing, e2 140045711 d3 holder, e2 pms 140012 54 c1 right hand hook, e2 1400 11 261 d1 screw, e2 140045 3511 d1 lever ii, e2 1400 11 227 c1 flat tie bar, e2 ieb czech pms 0467536 regulation sleee ring injection pump, e2 csn021103 24 screw m6x10, e2 140045 10231 d3 piping, e2 csn 022153 11 pin 6x45, e2 pms 022111 168 f3 pin, e2 ieb czech pms pnt 02 8406 hose js 10xm18x1.5x1600, e2 1400 12 122 d1 left hand suspension, e2 1400 2165 33 e1 connecting link, e2 csn 137931 ring nd6, e2 140045 1651 e1 sheave, e2 ieb czech pms 92151 54hand pump assembly, e2 634 450 007 propeller, e21400 11 129 e1 sleeve, e2 443 811 445 810 out ofrelay, e2 140045 2245 e1 screw eye, e2 1400 21 65 20d1 screw with eye left hand outpontoonder shore, e2 140045 4691 ce piping, e2 5315 049393 pinstraight hdless dia 25.0mm x o h lgh, e2 1400 11 112d1 gear wheel, e2 140045 4741 c1 piping, e2 1400455514 e1 reducing ring, e2 140045 10251 d3 piping, e2140045 10211 d3 piping, e2 140041 1095 e1 spring, e2140045 752 d1 axis, e2 140045 474163 piping, e2 iebczech pms 60005 42 inj pump body assy inj pump, e21400 21 65 22 e1 brake jaw, e2 140046 s9 a2 righthand laying gear, e2 1400 11 140 e1 pin, e2 5315049400 pin strainght headed pin dia 30.0mm x l, e2csn 137950 nut nd6, e2 029310 3 packing ring 30x36, e2 1400 11 131 e1 sleeve, e2 1400 11 117 d1 worm, e2type 933052 fog head lamp with white glass, e2 csn426711 21 piping tr dia 10x1 490 11353.1, e2 140046 s8a2 left hand laying gear, e2 pnt 02 8406 pressurehose js 10xm18x1.5x2500, e2 140046 1341 e1 pin, e21400 24 182 1 d1 rod, e2 140046 701 c1 retainingframe, e2 140045 11027 c3 pipe, e2 i1400 21 65 16 e1spring, e2 ieb czech pms 347 225 332 241 bulb 24v 2wba9s elect system, e2 140045 11013 lever, e2 1400451040 e1 spacing ring, e2 csn 023655 sealing feltgasket 150, e2 140046 1261 e1 arm, e2 1400 12 141 e1hasp for deck hasp tab 54, e2 1400 21 65 17 e1 pin, e2 140045 660 pin //bid details2 / 103

Central Government/Public Sector

TRN :35384557 | 23 Sep, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of draw hook beam reinforced for draw gear arrangement.

Central Government/Public Sector

TRN :35385890 | 24 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for supply of draw hook with collar for memu/dmc coaches, as per drawing: em21103,.

Central Government/Public Sector

TRN :35369214 | 03 Oct, 2025

Tender Value : 0

Samastipur - Bihar

Tender for supply of 1. holding chain of fire bucket, track guide and scotch block for bwtb type wagon as per rdso drawing no.- wd-00009-s-73, item no.- 1 a alt- nil., length per unit 5 mtr long in linked conditions specification and material spec. as per drawing. 2. secondary lashing chain complete for brst wagon to rdsos drg.no.- wd-82054-s-14, alt.-4.material specification:as per drawing. 3. primary lashing chain hook end for brst wagon to rdsos drawing no wd-82054-s-12 alt- nil or latest item no 06 confirming to drawing no. wa/lg-1830, alt.5 or latest material spec. as per drawing mentioned.

Central Government/Public Sector

TRN :35325083 | 30 Sep, 2025

Tender Value : 0

Jaipur - Rajasthan

Tender for supply of screw coupling maintenance gauges and draw hook gauge as per attached annexure -a with one year nabl certificate ..

Central Government/Public Sector

TRN :35334021 | 03 Oct, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for door handles as per is 208 (q4) , wire nails (q4) , hasps and staples as per is 363 (q3) , wood screws (q3) , steel butt hinges as per is 1341 (q3) , seat and back for sofa set 5 seater 40 density fd 373 281 , seat and back for sofa set 4 seater 40 density fd373281 , rubber solutionwrite solution make spb7 pidilite , looking mirror of size 48 inch x 18 inch x 5mm , looking mirror of size 48 inch x 15 inch x 5mm , shellac lakh dana in golden colour , touch wood make asian , knob brass cp with steel screw as per sample , fevicol marine in 01 kgs packing , adhesive tape 25mm width x 20 mr roll pkt of 06 nos make abro , french polish makeasian , coat hook aluminium 125mm long , chandrus as pre sample , wheel coaster twin wheel for revolving chair set of 5 , kesari powder as per sample , arm resthandle chair c b steeltubular as per fd75m made of 2 class , synthetic adhesive solution sr make pidilite , terpentine oil make ramco , drawer cupboard lock with brass leaver 50mm product code 49914992 harrison link , rubber shoe for table dining as per sample , screw wood steel 124 pkt containing 200 nos make nettle foldrk , rubber shoe for table office clerkofficer , nut bolt with washer 85mm x 6mm full thread , rubber shoe for chair varandra as per sample , rubber shoe for bed hard iron

Central Government/Public Sector

TRN :35292688 | 22 Sep, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for procurement of draft key for enhanced capacity draw hook to rdso drawing no. sk-99006 alt.2, specn.c-9509 rev.2 of feb. 2007, amdt. 1 of oct.2016.

Central Government/Public Sector

TRN :35280469 | 26 Sep, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for supply of charge hook as per rwf drawing.

Related Searched Keywords : draw hook

List of draw hook Tenders

Tender for supply of draw hook beam reinforced for draw gear arrangement.

Tender for supply of draw hook with collar for memu/dmc coaches, as per drawing: em21103,.

Tender for supply of screw coupling maintenance gauges and draw hook gauge as per attached annexure -a with one year nabl certificate ..

Tender for procurement of draft key for enhanced capacity draw hook to rdso drawing no. sk-99006 alt.2, specn.c-9509 rev.2 of feb. 2007, amdt. 1 of oct.2016.

Tender for supply of charge hook as per rwf drawing.

Get draw hook Tender Alert...

Related Searched Keywords : draw hook

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us